Steps to Check a Faulty Safety Switch
At your home, you will find safety switches in the circuit boards that have a special design to prevent any kind of electrical hazards to you and your family and save their lives. Like any other appliance, these switches also need checking at every interval to ensure they are working without any issues. If you have LED lighting at your house then it is important for an experienced electrician to properly check the safety switches.
In the following steps, we have discussed in detail the different ways a professional will check your safety switchboard:
Locate the switchboards
The first step is to detect the safety switches in the RCD circuit. People often get confused between safety switches and circuit breakers and fuses. It is to be known that each of them has their task to complete in the circuit. The safety switch is responsible for controlling the electricity flow through the circuit. When it detects any kind of leak, it turns the power off in milliseconds.
Check and clean
The next step for the Brisbane Electrician is to check the switchboard door hinge and along with its locking mechanism to make sure that it is working properly. The electrician often cleans the general area and the outside region of the switchboard.
Barcode RCD circuit
RCD circuits are barcoded to keep a track of the data management procedure.
Safety switch testing
During this stage, the Electrician in Capalaba has two ways of testing out things to keep people safe from any hazards:
- Push-button test: This test confirms the status of the RCD. Electricians perform the test to ensure everyone is safe.
- RCD testing: This is the process to check the safe tripping of the RCD. It is done to identify whether it can perform quickly to avoid any electrical problems. A good working RCD trips in as small as 40 milliseconds.
How to check your safety switchboard at home?
It is important to note that asking for professional Electrical services is always better than working without any experience as these tasks can be tricky and life-threatening.
When you are checking your switch, make sure you do this during broad daylight. While you check your switch, the lights will cut out for a short period. If you do this during the night, it will be difficult to see anything
Once you are prepared, open the switchboard and look out for the ‘test button’. Once you see it, press it firmly.
After pressing it if the safety switch trips off and if the lights go out then it is a good sign that everything is functioning properly.
Once you complete the process, flick the safety switch to its original ON position.
If you cannot find the ‘Test button’ along the row of circuit breakers, it is possible that your house does not have a safety switch and this could lead you and your family to great danger.
Bottom Line:
Take all the necessary precautions before doing any electrical tasks. It is crucial to seek professional advice prior to jumping into any fixes yourself. Chat to Thomas Blake Electrical for any of your electrical needs today!