6 Simple Electrical Troubleshooting Tips
The process of analyzing a faulty circuit in order to determine what’s wrong with it and identify defective components is called electrical troubleshooting. Many people think that they can do this by themselves; however, depending on the type of equipment, electrical troubleshooting could be both dangerous and quite challenging.
Therefore, it’s always best to seek professional help from an electrician if you notice any kind of electrical fault at your home. And, if you want to get the best electrical services Brisbane, look no further than Thomas Blake Electrical – the most experienced and highly-professional electrician in the area.
However, if you are a handy person and have some experience with home maintenance in particular electrical maintenance, to be sure you can check it yourself. Make sure you have proper safety equipment and follow these top electrical troubleshooting tips:
Top Simple Electrical Troubleshooting Tips
- Check the Faulty Device
First and foremost, before you even continue to look at whether or not there’s an issue with the wiring and switchboards, ensure you check the faulty device. It makes more sense to check the appliance first and then continue checking other parts. This way when you contact your electrician, you will have a better idea of what’s going on and you can answer more of their questions.
- Determine the Size of the Fault
Then, once you’ve identified the fault, it’s time to observe how much the fault has spread. This is what every experienced electrician does since it saves lots of time in the electrical troubleshooting process. If the fault is widespread, it is very likely that transients occur, and that circuit breakers and surge protectors trip.
- Check for Switch Connectivity
Checking the switches is the next step in the electrical troubleshooting process. In fact, switches often wear and tear, and cause electrical faults too, because they have parts inside that move when you turn it on and off. To check them you need to have an Ohmmeter. So, if you don’t have one, ensure you contact the best electrician – Thomas Blake Electrical.
- Look at Circuit Breakers and Fuse Boxes
Next, you should inspect your circuit breakers and fuses because the issue could sometimes be as easy-to-solve as a tripped circuit breaker or blown-up fuse. Hence, check the power points or the house residual current device (RCD) to see whether they’ve tripped.
- Take a Look at Your Electrical Schemes
The electrical schemes, which every household should have, can be really helpful in electrical troubleshooting. So, taking a look at yours can help you identify the issue, which is why an electrician would often ask for your electrical schematic drawing.
- Inspect the Wires
After localizing the faulty circuit, you should shut it down (which is a necessary precaution measure) and check specific electrical wires to locate the flaw. You should look for discoloured fixtures or melted wires as a potential cause of the circuit fault. After that, scan the neutral wires because if a neutral wire can’t return the current back and complete the circuit, leading to the circuit shut down.
The Bottom Line
Although you can try to perform electrical troubleshooting yourself, we don’t suggest you do unless you have experience in this area. The number one electrician – Thomas Blake Electrical – can help you with any and all of your electrical maintenance needs. To ensure you get the ultimate electrical services in Brisbane – contact Thomas Blake Electrical.
